Le produit de Pass4Test que vous choisissez vous met le pied sur la première marche du pic de l'Industrie IT, et vous serez plus proche de votre rêve. Les matériaux offerts par Pass4Test peut non seulement vous aider à réussir le test Tibco TB0-111, mais encore vous aider à se renforcer les connaissances professionnelles. Le service de la mise à jour pendant un an est aussi gratuit pour vous.
Aujoud'hui, c'est une société de l'informatique. Beaucoup d'organisations peut provider l'outil de se former pour le test Certification Tibco TB0-111. Mais on doit admettre que ces site n'ont pas la capacité à offrir une bonne Q&A, elles sont généralement très vagues et sans les points. C'est loin d'attirer les attentions des candidats.
Code d'Examen: TB0-111
Nom d'Examen: Tibco (TIBCO Rendezvous 8 Exam)
Questions et réponses: 120 Q&As
Le produit de Pass4Test est réputée par une bonne qualité et fiabilité. Vous pouvez télécharger le démo grantuit pour prendre un essai, nons avons la confiance que vous seriez satisfait. Vous n'aurez plus de raison à s'hésiter en face d'un aussi bon produit. Ajoutez notre Q&A au panier, vous aurez une meilleure préparation avant le test.
Dans cette Industrie IT intense, le succès de test Tibco TB0-111 peut augmenter le salaire. Les gens d'obtenir le Certificat Tibco TB0-111 peuvent gagner beaucoup plus que les gens sans Certificat Tibco TB0-111. Le problème est comment on peut réussir le test plus facile?
TB0-111 Démo gratuit à télécharger: http://www.pass4test.fr/TB0-111.html
NO.1 For Rendezvous secure daemon (RVSD), subject access can be restricted to specific users. Where on
the RVSD browser interface is this feature configured?
A. on the User's page
B. on the Subject Access page
C. on the Limiting Access page
D. on the Authorize Subjects page
Answer: C
Tibco TB0-111 TB0-111 TB0-111 examen
NO.2 In TIBCO Rendezvous, a control channel is used for communication between _____.
A. Rendezvous daemons and client processes
B. Rendezvous daemons and browser interface
C. Rendezvous managed daemons and Rendezvous non-managed daemons
D. Rendezvous Daemon Manager (RVDM) and Rendezvous managed daemons
Answer: D
Tibco certification TB0-111 certification TB0-111 TB0-111 examen
NO.3 You plan to test a network to ensure that it meets the following requirements: 100,000 point-topoint
messages to be published by a single source in batch mode with ten messages per batch with an interval
gap of 10 milliseconds. What is the correct rvperfm command to start a test run?
A. rvperfm -service 7501 -daemon 7500 -inbox -messages 100000 -interval 10 -batch 10
B. rvperfm -service 7500 -daemon 7500 -inbox -messages 100000 -interval 0.01 -batch 10
C. rvperfm -service 7500 -daemon 7500 -subject PTP -messages 100000 -interval 10 -batch 10
D. rvperfm -service 7501 -daemon 7500 -subject _INBOX -messages 100000 -interval 10 -batch
E. rvperfm -service 7501 -daemon 7500 -subject _PTP -messages 100000 -interval 0.01 -batch 10
Answer: B
Tibco TB0-111 examen TB0-111
NO.4 tibrvlistenis started with the following settings: -network ";224.2.2.2;224.6.6.6" "mytest" tibrvsend is
started with the following settings: -network ";224.6.6.6;224.2.2.2" "mytest". "message #1" What is the
expected result?
A. The listener receives "message #1" only when run on a different host than the sender.
B. The listener does not receive "message #1" when run on a different host than the sender.
C. The listener will receive the message only if both the listener and sender run on the same host.
D. The listener will receive the message only if both the listener and sender connect remotely to the same
daemon.
Answer: A
Tibco TB0-111 examen TB0-111
NO.5 Which statement is correct about the _RV.INFO.RVCM.DELIVERY.CONFIRM.subject advisory?
A. A listener sends this advisory to confirm receipt of a certified message.
B. The sender presents this advisory after deleting the message from its ledger.
C. A sender presents this advisory whenever a registered listener confirms receipt of a certified message.
D. A sender presents this advisory when all registered listeners have either confirmed delivery of a
certified message, or canceled interest in receiving it.
Answer: B
Tibco examen certification TB0-111 TB0-111 examen TB0-111
NO.6 The following is the declaration of secure daemon in Rendezvous C API: tibrv_status
tibrvSecureDaemon_SetUserCertWithKey( const char* userCertWithKey, const char* password);
Which two statements are correct about this function? (Choose two.)
A. The password parameter is used to decrypt the private key.
B. The password parameter is used for the password for this user.
C. TheuserCertWithKey parameter is used to register user certificate with a private key. The text of this
certificate must be in PEM encoding.
D. TheuserCertWithKey parameter is used to register user certificate with a private key. The text of this
certificate may be in PEM or PK12 encoding.
Answer: A,C
Tibco certification TB0-111 TB0-111 TB0-111 TB0-111 examen certification TB0-111
NO.7 Which two statement are correct about certified delivery confirmation? (Choose two.)
A. Explicit confirmation of message delivery by the listening program is the default behavior.
B. When confirmation reaches the certified sender, the transport presents a DELIVERY.CONFIRM
advisory.
C. Automatic confirmation of message delivery upon return from the callback function is the default
behavior.
D. When confirmation reaches the certified listener, the transport presents a
DELIVERY.CONFIRM advisory.
E. When confirmation reaches the certified sender, the transport presents a
DELIVERY.COMPLETE advisory.
Answer: B,C
certification Tibco TB0-111 TB0-111
NO.8 With TIBCO Rendezvous messaging, which networking protocol does the client application use to
connect to the Rendezvous daemon (RVD)?
A. SSL
B. TCP
C. UDP
D. HTTP
Answer: D
Tibco examen TB0-111 examen TB0-111 certification TB0-111
NO.9 Which statement is correct about Rendezvous fault-tolerant groups (RVFTs)?
A. RVFT is an election protocol that tells an application when it is active or inactive.
B. RVFT can only be utilized for message producers, not for message consumers.
C. For reliable consumers bound to an RVFT transport, the RVFT transport automatically disables
subscriptions if the fault-tolerant group member becomes inactive.
D. For certified consumers bound to an RVFT transport, the RVFT transport automatically
confirms messages if the fault-tolerant group member becomes inactive.
E. For certified consumers bound to an RVFT transport, the RVFT transport automatically cancels the
certified agreement if the fault-tolerant group member becomes inactive.
Answer: A
Tibco TB0-111 TB0-111
NO.10 A publisher application uses a transport with UDP port number 8600 and multicast group 239.1.1.1.
Which two sets of transport parameters enable a subscriber application to receive messages from the
publisher? (Choose two.)
A. Service 6800, Network ";239.1.1.0;239.1.1.1"
B. Service 8600, Network ";239.1.1.0;239.1.1.1"
C. Service 8600, Network ";239.1.1.1,239.1.1.0"
D. Service 8600, Network ";239.1.1.0,239.1.1.1;239.1.1.1"
Answer: C,D
Tibco examen TB0-111 TB0-111 examen
NO.11 Click the Exhibit button.
Which menu option shown in the exhibit is used for setting the default service and network for
Rendezvous secure daemons (RVSDs)?
A. Users
B. Services
C. XML Configuration
D. Daemon Parameters
E. Networks and Services
Answer: D
Tibco TB0-111 examen TB0-111
NO.12 Which advisory message does a Rendezvous fault-tolerant member present when other group
members use parameters that do not match its corresponding parameters?
A. _RV.ERROR.RVFT.PARAM_MISMATCH.group
B. _RV.ERROR.RVFT.PARAM_COLLISION.group
C. _RV.ERROR.RVFT.MEMBER_UNAVAILABLE.group
D. _RV.ERROR.RVFT.MEMBER_PARAM_MISMATCH.group
Answer: A
Tibco TB0-111 certification TB0-111
NO.13 Which three activities can be configured through the Rendezvous routing daemon (RVRD) HTTP
interface to be routinely output to the RVRD log file? (Choose three.)
A. Subject Data: to log all messages that this routing daemon forwards to its neighbors or receives from
its neighbors
B. Connections: to log connection activity whenever this routing daemon establishes or closes a
connection to a neighbor
C. Client: to log RVRD local client connection activity whenever a client application establishes or closes a
connection to the routing daemon
D. Subject interest: to log all subscription requests (notification of listening) that this routing daemon
sends to its neighbors or receives from its neighbors
E. Remote: to log RVRD remote client connection activity whenever a remote client application
establishes or closes a connection to the routing daemon
Answer: A,B,D
Tibco TB0-111 TB0-111 TB0-111 TB0-111 certification TB0-111
NO.14 Company A will deploy their Rendezvous applications to their production environment. They need to
run five RVDs, two RVRDs, one RVA, and one RVTRACE utility on one particular host. How many ticket
files (tibrv.tkt) are needed on the host?
A. one
B. seven
C. eight
D. nine
E. four
Answer: A
certification Tibco TB0-111 TB0-111 examen TB0-111 TB0-111
NO.15 Queue dispatch calls remove the event at the head of a queue, and run its callback function. What is
the correct behavior for the three types of dispatch calls in situations where the queue is empty? (Choose
three.)
A. Ordinary dispatch blocks indefinitely, until the queue contains an event.
B. Polling dispatch does not block. If the queue is empty, it returns immediately.
C. Timed dispatch does not block for an event, but keeps on polling periodically.
D. Ordinary dispatch blocks for the timeout value, until the queue contains an event.
E. Polling dispatch blocks waiting for an event. If the queue is empty, it returns immediately.
F. Timed dispatch blocks waiting for an event, but returns without dispatching anything if a waiting time
limit is exceeded.
Answer: A,B,F
Tibco certification TB0-111 TB0-111 examen TB0-111 examen certification TB0-111
NO.16 Your back-end processing supports multi-threading and you plan to leverage this capability in the
context of a Rendezvous distributed queue (RVCMQ) subscriber by running five concurrent threads.
Which statement is correct?
A. RVCMQ scales by multiple program instances (horizontally), not by multi-threading (vertically).
B. Each distributed queue member receives as many messages as specified by the scheduler
configuration (the scheduler tasks parameter must be set to 5 or greater).
C. Each distributed queue member receives as many messages as specified by the worker tasks
parameter (the worker tasks parameter of each queue member must be equal to or greater than 5).
D. Each distributed queue member receives as many messages as it dispatches (nothing needs to be
done from a RVCMQ standpoint as it is a matter of the multi-threaded message dispatching).
Answer: C
Tibco TB0-111 TB0-111 examen TB0-111 TB0-111 examen TB0-111 examen
NO.17 Which two situations can trigger the presentation of a SCHEDULER.OVERFLOW advisory? (Choose
two.)
A. Scheduler has set a task backlog limit.
B. Scheduler has not set a task backlog limit.
C. Scheduler is accepting new tasks, but discarding old ones on a FIFO basis.
D. The Scheduler backlog limit has been reached and new tasks are being discarded.
Answer: A,D
Tibco certification TB0-111 certification TB0-111 certification TB0-111
NO.18 Where is the Rendezvous license ticket file located?
A. It can be in any directory in theclasspath.
B. It can be in any directory in the execution path.
C. It must be in the Rendezvous Home/lib directory.
D. It must be in the Rendezvous Home/bin directory.
Answer: A
Tibco certification TB0-111 TB0-111
NO.19 Which two statements are correct about fault-tolerant groups? (Choose two.)
A. Members of a fault-tolerant group are ranked by means of the specified member weight.
B. Fault-tolerant groups implement a K of N active strategy (K member of a group is active while N-K
members are passive).
C. Members of a fault-tolerant group are ranked by means of the specified member weight, which must be
a unique value within the fault-tolerant group.
D. Members of a fault-tolerant group are ranked by means of the specified member weight. Members with
equal weight are ranked by the time they joined the fault-tolerant group.
E. The members of a fault-tolerant group are ranked by means of the specified member weight. Members
with equal weight are ranked by non-deterministic means opaque to programs.
Answer: B,E
Tibco TB0-111 examen certification TB0-111
NO.20 When programming a TIBCO Rendezvous fault-tolerant application, it is a documented best practice to
associate fault-tolerant member events with _____.
A. a low-priority queue
B. a high-priority queue
C. a system event queue
D. the default event queue
Answer: B
Tibco examen TB0-111 certification TB0-111
Le test Tibco TB0-111 est bien populaire dans l'Industrie IT. Mais ça coûte beaucoup de temps pour bien préparer le test. Le temps est certainemetn la fortune dans cette société. L'outil de formation offert par Pass4Test ne vous demande que 20 heures pour renforcer les connaissances essentales pour le test Tibco TB0-111. Vous aurez une meilleure préparation bien que ce soit la première fois à participer le test.
没有评论:
发表评论