Meilleur Microsoft 70-544-VB test formation guide

Le suucès n'est pas loin de vous une fois que vous choisissez le produit de Q&A Microsoft 70-544-VB de Pass4Test.

Pass4Test est un site de vous ramener au succès. Pass4Test peut vous aider à promouvoir les connaissances essentielles pour le test Microsoft 70-544-VB et passer le test à la première fois.

La Q&A Microsoft 70-544-VB de Pass4Test est liée bien avec le test réel de Microsoft 70-544-VB. La mise à jour gratuite est pour vous après vendre. Nous avons la capacité à vous assurer le succès de test Microsoft 70-544-VB 100%. Si malheureusement vous échouerez le test, votre argent sera tout rendu.

Les produits de Pass4Test a une bonne qualité, et la fréquence de la mise à jour est bien impressionnée. Si vous avez déjà choisi la Q&A de Pass4Test, vous n'aurez pas le problème à réussir le test Microsoft 70-544-VB.

Si vous voulez se prouver une compétition et s'enraciner le statut dans l'industrie IT à travers de test Certification Microsoft 70-544-VB, c'est obligatoire que vous devez avior les connaissances professionnelles. Mais il demande pas mal de travaux à passer le test Certification Microsoft 70-544-VB. Peut-être d'obtenir le Certificat Microsoft 70-544-VB peut promouvoir le tremplin vers l'Industrie IT, mais vous n'avez pas besoin de travailler autant dur à préparer le test. Vous avez un autre choix à faire toutes les choses plus facile : prendre le produit de Pass4Test comme vos matériaux avec qui vous vous pratiquez avant le test réel. La Q&A de Pass4Test est recherchée particulièrement pour le test IT.

Le produit de Pass4Test que vous choisissez vous met le pied sur la première marche du pic de l'Industrie IT, et vous serez plus proche de votre rêve. Les matériaux offerts par Pass4Test peut non seulement vous aider à réussir le test Microsoft 70-544-VB, mais encore vous aider à se renforcer les connaissances professionnelles. Le service de la mise à jour pendant un an est aussi gratuit pour vous.

Code d'Examen: 70-544-VB
Nom d'Examen: Microsoft (TS: Ms Virtual Earth 6.0, Application Development)
Questions et réponses: 67 Q&As

Aujourd'hui, c'est une société pleine de gens talentueux, la meilleure façon de suivre et assurer la place dans votre carrière est de s'améliorer sans arrêt. Si vous n'augmentez pas dans votre carrière, vous êtes juste sous-développé parce que les autres sont meilleurs que vous. Pour éviter ce cas, vous devez vous former successivement.

70-544-VB Démo gratuit à télécharger: http://www.pass4test.fr/70-544-VB.html

NO.1 You are integrating third-party data into a Virtual Earth 6.0 application. The data that is retrieved from
the third party is stored in an array named Results. The Results array is stored inside a Web handler. The
data is stored in the following format.
The Web handler uses the GeoRSSFeed class to accept items of type GeoRSSItem. The class contains
the ToString() method that writes the GeoRSS feed to a string.
The Web handler GeoRSS integration is defined by the following code segment. (Line numbers are
included for reference only.)
You need to encode the data inside the Results array into the GeoRSS format.
Which code segment should you insert at line 05?
A. Dim objEnumerator As IEnumerator
Dim Keys As Collections.Generic.Dictionary(Of String, _ String).KeyCollection = Results(i).Keys()
Dim curKey As String
objEnumerator = Keys.GetEnumerator()
Do While objEnumerator.MoveNext
curKey = objEnumerator.Current
curItem.Add(curKey, Results(i)(curKey))
Loop
B. curItem.Add("title", Results(i)("name"))
curItem.Add("description", Results(i)("address"))
curItem.Add("latitude", Results(i)("latitude"))
curItem.Add("longitude", Results(i)("longitude"))
curItem.Add("icon", Results(i)("thumbnail"))
C. curItem.Add("title", Results(i)("name"))
curItem.Add("description", String.Format("{0}|{1}", _
Results(i)("address"), Results(i)("thumbnail")))
curItem.Add("latitude", Results(i)("latitude"))
curItem.Add("longitude", Results(i)("longitude"))
D. curItem.Add("name", Results(i)("name"))
curItem.Add("address", string.Format("{0}|{1}", _
Results(i)("address"), Results(i)("thumbnail"))
curItem.Add("latitude", Results(i)("latitude"))
curItem.Add("longitude", Results(i)("longitude"))
Answer: C

Microsoft   certification 70-544-VB   certification 70-544-VB   70-544-VB   certification 70-544-VB

NO.2 You are creating a Virtual Earth 6.0 application. The application will use data that is stored in the
Microsoft MapCruncher output format.
The MapCruncher output is defined in the following manner:
var tileSrc = http://dev.live.com/virtualearth/sdk/layers/layer1
You need to ensure that the application displays the data as a new layer on the Virtual Earth map.
Which code segment should you use?
A. var tileSourceSpec = new VETileSourceSpecification("layer1/%4.png", tileSrc);
map.AddTileLayer(tileSourceSpec, true);
B. var tileSourceSpec = new VETileSourceSpecification("layer1", tileSrc + /%4);
map.AddTileLayer(tileSourceSpec, true);
C. var tileSourceSpec = new VETileSourceSpecification("layer1", tileSrc + "/%4.png");
map.AddTileLayer(tileSourceSpec, true);
D. var tileSourceSpec = new VETileSourceSpecification("layer1", tileSrc + /%1.png);
map.AddTileLayer(tileSourceSpec, true);
Answer: C

Microsoft   70-544-VB   70-544-VB   certification 70-544-VB

NO.3 Your Microsoft MapPoint Web Service (MWS) User Id is 124566, and your MWS password is
P@ssw0rd.
You need to use MWS to create an application.
Which code segment should you use?
A. Dim appCredential As New System.Net.NetworkCredential("124566", "P@ssw0rd")
B. Dim appCredential = New System.Security.Principal.NTAccount("124566", "P@ssw0rd")
C. Dim appCredential As New System.Security.Principal.GenericIdentity("124566", "P@ssw0rd")
D. Dim appCredential As New System.EnterpriseServices.SecurityIdentity("124566", "P@ssw0rd")
Answer: A

Microsoft examen   certification 70-544-VB   70-544-VB   70-544-VB   certification 70-544-VB

NO.4 You are updating a Virtual Earth 6.0 store locator. A database table named Stores contains the City and
State fields. A Microsoft SQL Server 2005 function named CalculateDistance measures the distance
between two points.
The store locator contains a stored procedure named LookupStores that retrieves the names of stores
located in a given city and state. The city and state are passed in as parameters to the stored procedure.
You need to extend the store locator to support a proximity search within a given radius.
Which two tasks should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Add a Radius field to the Stores table.
B. Add a Distance field to the Stores table.
C. Add Latitude and Longitude fields to the Stores table.
D. Extend the LookupStores stored procedure to use CalculateDistance.
E. Create a new stored procedure that uses CalculateDistance along with the result set from the
LookupStores stored procedure.
F. Create a new stored procedure that uses CalculateDistance along with the entire data set from the
Stores table.
Answer: C AND F

Microsoft examen   70-544-VB   certification 70-544-VB   70-544-VB   certification 70-544-VB   70-544-VB examen

NO.5 You are managing Microsoft MapPoint Web Service (MWS) data in an application by using the
Customer Services site. The application uses the DS_ONE data source stored on the Customer Services
site.
The application displays several records in the wrong locations on the map.
You need to display these records correctly on the map.
What should you do?
A. View the data source geocoding results. Filter on match code. Manually edit all the resulting locations
through the Customer Services site.
B. Download the data source. Remove the latitude and longitude data. Re-upload the corrected data to
the Customer Services site.
C. Download the data source. Update all the locations by using a Find or FindAddress call. Re-upload the
corrected data to the Customer Services site.
D. Download the data source. Update each bad geocode by using a Find or FindAddress call. Re-upload
the corrected data to the Customer Services site.
Answer: A

Microsoft   70-544-VB   70-544-VB

NO.6 A Virtual Earth 6.0 application loads locations from a local Microsoft SQL Server 2005 database. You
update locations in the database manually.
You plan to automate the manual process.
You need to ensure that the automation process updates the maximum number of locations in the least
amount of time.
What should you do?
A. Call the Find method for each location by using Microsoft MapPoint Web Service.
B. Call the FindAddress method for each location by using Microsoft MapPoint Web Service.
C. Push all locations to Customer Data Services by using the UploadSpecification class, and retrieve the
results.
D. Push all locations to Customer Data Services by using the BatchGeocodeSpecification class, and
retrieve the results.
Answer: D

certification Microsoft   70-544-VB examen   70-544-VB   70-544-VB   70-544-VB   70-544-VB

NO.7 You deploy a Virtual Earth 6.0 application that uses Microsoft ASP.NET Asynchronous JavaScript and
XML (AJAX) implementation to retrieve data.
The myAjaxCallback function evaluates any AJAX response. The function contains the following code
segment. (Line numbers are included for reference only.)
At the time the request was made, the server was overloaded. When the server processed the AJAX
request, the server returned an error message.
You need to ensure that the application does not produce a fatal exception due to the error generated
from the AJAX response.
Which code segment should you insert at line 03?
A. If(xmlHttp.status == 200){
eval(xmlHttp.responseText);
}
else{
// Update user with status here.
}
B. try{
eval(xmlHttp.responseText);
}
catch(error){
// Update user with status here.
}
C. try{
eval(xmlHttp.responseText);
}
catch(error){
eval(xmlHttp.responseXML);
}
D. try{
eval(xmlHttp.responseText);
}
catch(error){
if(xmlHttp.status == 200){
eval(xmlHttp.responseText);
}
}
Answer: A

Microsoft   certification 70-544-VB   70-544-VB   70-544-VB   70-544-VB

NO.8 You are writing a code segment for a Virtual Earth 6.0 application. The code segment returns data for
multiple locations to a client-side JavaScript function that makes the initial request.
The returned data contains the following properties for each location:
ID
Latitude
Longitude
Address
You need to format all locations and their properties in JavaScript Object Notation (JSON) format.
Which code segment should you use?
A. var results = new Array();
results[0] = 123;
results[1] = 40.0;
results[2] = -74.0;
results[3] = " 123 Main St .";
B. var results = new Array();
results[0] = new Array();
results[0][0] = 123;
results[0][1] = 40.0;
results[0][2] = -74.0;
results[0][3]= " 123 Main St .";
C. var results = {
ID: 123,
Latitude: 40.0,
Longitude: -74.0,
Address: " 123 Main St ."
};
D. var results = {
0:{
ID: 123,
Latitude: 40.0,
Longitude: -74.0,
Address: " 123 Main St "
}
};
Answer: D

Microsoft   70-544-VB   certification 70-544-VB   70-544-VB examen   70-544-VB

NO.9 You are creating a custom tile set by using Microsoft MapCruncher.
The tile set must overlay a weather map image in a Virtual Earth 6.0 application by using MapCruncher.
You need to perform two tasks before using MapCruncher to create the custom tile set.
Which two tasks should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Split the weather map image into tiles.
B. Obtain the latitude and longitude coordinates for the corners of the weather map image.
C. Apply the proper alpha filter to the weather map image to display any transparent portions on the
Virtual Earth map.
D. Obtain low resolution weather map images for low zoom levels and high resolution weather map
images for high zoom levels.
Answer: B AND C

Microsoft   70-544-VB   70-544-VB examen   70-544-VB examen   certification 70-544-VB

NO.10 You are creating a Virtual Earth 6.0 application that retrieves locations from a Microsoft SQL Server
2005 database.
A stored procedure will be used to retrieve only locations that lie within the currently displayed map area.
You need to define the boundary within which the locations displayed on the map must lie.
How should you define the boundary?
A. points represented by the bottom-right and top-left pixel coordinates
B. points represented by the bottom-right and top-left latitude and longitude coordinates
C. the center point of a circle whose radius is equal to the size of the map based on pixel coordinates
D. the center point of a circle whose radius is equal to the size of the map based on latitude and longitude
coordinates
Answer: B

certification Microsoft   70-544-VB   70-544-VB   70-544-VB examen

Pass4Test est un fournisseur important de résume du test Certification IT dans tous les fournissurs. Les experts de Pass4Test travaillent sans arrêt juste pour augmenter la qualité de l'outil formation et vous aider à économiser le temps et l'argent. D'ailleur, le servie en ligne après vendre est toujours disponible pour vous.