Les spécialistes d'expérience de Pass4Test ont fait une formation ciblée au test HP HP0-Y30. Cet outil de formation est convenable pour les candidats de test HP HP0-Y30. Pass4Test n'offre que les produits de qualité. Vous aurez une meilleure préparation à passer le test avec l'aide de Pass4Test.
La Q&A lancée par Pass4Test est bien poupulaire. Pass4Test peut non seulement vous permettre à appendre les connaissances professionnelles, et aussi les expériences importantes résumées par les spécialistes dans l'Industrie IT. Pass4Test est un bon fournisseur qui peut répondre une grande demande des candidats. Avec l'aide de Pass4Test, vous aurez la confiance pour réussir le test. Vous n'aurez pas aucune raison à refuser le Pass4Test.
Participer au test HP HP0-Y30 est un bon choix, parce que dans l'Industire IT, beaucoup de gens tirent un point de vue que le Certificat HP HP0-Y30 symbole bien la professionnalité d'un travailleur dans cette industrie.
Code d'Examen: HP0-Y30
Nom d'Examen: HP (Implementing HP Networking Technologies)
Questions et réponses: 137 Q&As
Après une longue attente, les documentations de test HP HP0-Y30 qui combinent tous les efforts des experts de Pas4Test sont finalement sorties. Les documentations de Pass4Test sont bien répandues pendant les candidats. L'outil de formation est réputée par sa haute précision et grade couverture des questions, d'ailleurs, il est bien proche que test réel. Vous pouvez réussir le test HP HP0-Y30 à la première fois.
HP0-Y30 Démo gratuit à télécharger: http://www.pass4test.fr/HP0-Y30.html
NO.1 At the CLI of an HP E5406 zl switch, you have assigned ports A1-A4 to VLAN 70 as untagged
members. All other configuration parameters on the E5406 zl are at default settings. The E5406 zl is
connected through port B1 to an HP E8212 zl switch. The E8212 zl has been configured with an IP
interface associated with VLAN 70, and IP routing has been enabled. On the E5406 zl, what must you do
to enable the E8212 zl to act as default gateway for VLAN 70 clients?
A. Define an IP interface in VLAN 70.
B. Configure port B1 to be a member of VLAN 70.
C. Define the VLAN 70 IP address of the E8212 zl as the default gateway.
D. Add a static route to the E8212 to the E5406 zl route table.
Answer: B
HP examen HP0-Y30 examen certification HP0-Y30 certification HP0-Y30 HP0-Y30
NO.2 Click the Exhibit button.
Which statement accurately describes the state of Gigabit Ethernet 3/0/12 in the HP A-Series switch
configuration shown in the exhibit?
A. The interface will be a tagged member of VLAN 12.
B. The interface will be an untagged member of VLAN 1.
C. The interface will be an untagged member of VLAN 12.
D. The interface will drop all incoming packets for VLAN 12.
Answer: C
HP HP0-Y30 examen HP0-Y30 HP0-Y30
NO.3 Which A-Series switch is designed for the large data center and the enterprise core?
A. A5820
B. A7500
C. A9500
D. A12500
Answer: D
HP examen HP0-Y30 certification HP0-Y30 certification HP0-Y30 HP0-Y30
NO.4 You have entered the following command at the CLI of an HP E5400 zl Series switch. Switch(vlan-1)# ip
address 192.168.1.225/24
The switch's other VLAN and IP parameters are at factory defaults. While testing this configuration, you
find that the switch cannot ping a server located at 192.168.2.22. You have confirmed the server is up and
available. This server is located in a data center not directly connected to your switch.
What must you configure on the switch to enable connectivity between these two devices?
A. Add a default gateway.
B. Modify the IP address to 192.168.1.225/26.
C. Enable IP routing.
D. Add the server to allowed hosts list.
Answer: A
certification HP HP0-Y30 HP0-Y30 HP0-Y30 examen
NO.5 What is the effect of the following command entered at the CLI of an HP E3500 yl switch?
E3500(vlan-44)#interface 23
A. The CLI displays the status of port 23.
B. Port 23 becomes a member of VLAN 44.
C. Port 23 is enabled.
D. The CLI enters the configuration context for port 23.
Answer: D
certification HP HP0-Y30 HP0-Y30 examen certification HP0-Y30 HP0-Y30 HP0-Y30 examen
NO.6 You must reset the startup configuration of an HP A-Series switch to factory defaults. Which CLI view
will enable you to complete this task?
A. manager view
B. global configuration view
C. system view
D. user view
Answer: D
HP HP0-Y30 examen certification HP0-Y30 HP0-Y30 examen
NO.7 What is a fit Access Point?
A. an AP that can provide WLAN services without a controller
B. an AP that has no intelligence and requires a wireless controller
C. an AP that can be deployed autonomously or with a controller
D. an AP that provides some intelligence under the management of a controller
Answer: D
certification HP certification HP0-Y30 HP0-Y30 HP0-Y30 certification HP0-Y30 certification HP0-Y30
NO.8 Which type of port can handle more than one untagged VLAN on an HP A-Series switch?
A. trunk
B. access
C. aggregated
D. hybrid
Answer: D
HP certification HP0-Y30 HP0-Y30 HP0-Y30
NO.9 You have initiated a console session on an HP A-Series switch at default settings. What is your
privilege level?
A. Visit (0)
B. Monitor (1)
C. System (2)
D. Manage (3)
Answer: D
HP HP0-Y30 HP0-Y30 examen
NO.10 Which interface is available for managing A-Series switches at factory default settings?
A. Telnet
B. menu
C. console
D. web
Answer: C
HP examen certification HP0-Y30 HP0-Y30 HP0-Y30 HP0-Y30 examen HP0-Y30 examen
NO.11 Which view is indicated by the following prompt on an HP A7500 switch? <A7500>
A. system
B. operator
C. user
D. console
Answer: C
HP HP0-Y30 examen HP0-Y30 HP0-Y30 certification HP0-Y30
NO.12 Which HP E-Series switch models are fixed-port switches? (Select two.)
A. E8212 zl
B. E4204 vl
C. E6600-24G
D. E5406 zl
E. E3500-48G yl
Answer: CE
HP HP0-Y30 HP0-Y30
NO.13 Which HP E-Series switch features redundant management and fabric modules?
A. E2910 al
B. E8212 zl
C. E5412 zl
D. E4208 vl
Answer: B
certification HP HP0-Y30 examen HP0-Y30 HP0-Y30 HP0-Y30 HP0-Y30
NO.14 You have uploaded an application file named "A12500.bin" to an HP A12500 switch.
Which command ensures this file is used during the next boot cycle?
A. boot-file cf:/A12500.bin main
B. load appfile cf:/A12500.bin main
C. boot-loader file cf:/A12500.bin main
D. set boot file cf:/A12500.bin main
Answer: C
HP HP0-Y30 certification HP0-Y30
NO.15 You must configure SSH on an HP A7500 switch. Which item must be generated on the switch?
A. passphrase
B. shared secret
C. self-signed certificate
D. encryption keys
Answer: D
HP HP0-Y30 examen HP0-Y30 examen
NO.16 You must configure VLANs and ports on an HP A7500 switch at default settings. What is the effect of
the following commands?
[SW-Gigabit-Ethernet1/0/1]port link-type trunk [SW-Gigabit-Ethernet1/0/1]port trunk permit vlan 100 101
A. The switch will forward traffic for VLANs 100 and 101 with 802.1Q tags. Traffic for VLAN 1 will be
untagged. Traffic for all other VLANs will be discarded.
B. The switch will add port 1/0/1 to a Link Aggregation Group (LAG) that is a tagged member of VLANs
100 and 101.
C. The switch will forward traffic for VLANs 100 and 101, but will discard traffic for all other VLANs.
D. The switch will forward VLAN 101 traffic with 802.1Q tags. VLAN 100 traffic will be untagged.
Answer: A
HP examen HP0-Y30 examen HP0-Y30 HP0-Y30 HP0-Y30
NO.17 You must define a hostname on an HP E5400 zl Series switch. Which configuration context must you
enter to perform this task?
A. manager
B. system
C. administrator
D. global configuration
Answer: D
certification HP HP0-Y30 HP0-Y30 HP0-Y30
NO.18 What is the effect of the following command entered at the CLI of an HP E5400 zl Series switch at
factory default settings.?
Switch# exit
A. The user is logged out of the console.
B. The privilege level moves from manager to operator.
C. Unsaved configuration changes are deleted.
D. The user exits from configuration mode.
Answer: B
HP examen HP0-Y30 examen HP0-Y30 examen
NO.19 What is the effect of the following command entered at the CLI of an HP E5400 zl Series switch?
Switch(vlan-100)# end
"Pass Any Exam. Any Time." - www.actualtests.com 3
A. The CLI displays the Operator prompt.
B. The CLI displays the Manager prompt.
C. VLAN 100 is deleted from the switch.
D. The CLI displays the global configuration prompt.
Answer: D
HP HP0-Y30 HP0-Y30 certification HP0-Y30 HP0-Y30
NO.20 You must configure a port on an A5800 switch to support protocol-based VLANs and port-based
VLANs. Which port type supports this requirement?
A. hybrid
B. access
C. aggregated
D. trunk
E. tagged
Answer: A
certification HP HP0-Y30 examen HP0-Y30 examen HP0-Y30
Il faut une bonne préparation et aussi une série de connaissances professionnelles complètes pour réussir le test HP HP0-Y30. La ressourece providée par Pass4Test peut juste s'accorder votre demande.
没有评论:
发表评论