HP meilleur examen HP0-Y35, questions et réponses

Le test HP HP0-Y35 est bien populaire dans l'Industrie IT. Mais ça coûte beaucoup de temps pour bien préparer le test. Le temps est certainemetn la fortune dans cette société. L'outil de formation offert par Pass4Test ne vous demande que 20 heures pour renforcer les connaissances essentales pour le test HP HP0-Y35. Vous aurez une meilleure préparation bien que ce soit la première fois à participer le test.

Les experts de Pass4Test profitent de leurs expériences et connaissances à augmenter successivement la qualité des docmentations pour répondre une grande demande des candidats, juste pour que les candidats soient permis à réussir le test HP HP0-Y35 par une seule fois. Vous allez avoir les infos plus proches de test réel à travers d'acheter le produti de Pass4Test. Notre confiance sont venue de la grande couverture et la haute précision de nos Q&As. 100% précision des réponses vous donnent une confiance 100%. Vous n'auriez pas aucun soucis avant de participer le test.

Il y a nombreux façons à vous aider à réussir le test HP HP0-Y35. Le bon choix est l'assurance du succès. Pass4Test peut vous offrir le bon outil de formation, lequel est une documentation de qualité. La Q&A de test HP HP0-Y35 est recherchée par les experts selon le résumé du test réel. Donc l'outil de formation est de qualité et aussi autorisé, votre succès du test HP HP0-Y35 peut bien assuré. Nous allons mettre le jour successivement juste pour répondre les demandes de tous candidats.

Code d'Examen: HP0-Y35

Nom d'Examen: HP (Wireless Networks - ASE 2011 Delta Exam)

Questions et réponses: 75 Q&As

Bien qu'Il y ait plein de talentueux dans cette société, il manque beaucoup de professionnels dans les domaine en cours de développement, l'Industrie IT est l'un de ces domaines. Donc le test HP HP0-Y35 est un bon l'examination de technique informatique. Pass4Test est un site d'offrir la formation particulière au test HP HP0-Y35.

HP0-Y35 Démo gratuit à télécharger: http://www.pass4test.fr/HP0-Y35.html

NO.1 Which sampling mechanisms are available in sFlow in A-Series switches and routers? (Select
two.)
A. packet-based
B. packet-length-based
C. time-based
D. ip-protocol-based
E. ip-source-address-based
F. mac-address-based
Answer: A,C

HP   HP0-Y35   HP0-Y35   HP0-Y35

NO.2 Click the Exhibit button.
You have recently upgraded the Comware of an HP A-Series Access Controller (AC). Prior to
rebooting the device, you issued the dir command to display the contents of the flash root
directory. Upon reboot, the AC does not successfully run the new version of firmware. What is the issue?
A. The device does not have enough memory to run the new firmware.
B. The filename of the firmware is incorrect.
C. The new firmware is not present in the root directory.
D. Thebootware of the device requires updating as well.
Answer: B

HP   HP0-Y35 examen   certification HP0-Y35   HP0-Y35 examen   HP0-Y35

NO.3 You have been asked to deploy an additional HP A-Series wireless access point in the conference room
of an advertising agency. You connect to the CLI of the access controller and create an AP management
template. In which view do you specify the serial number of the access point?
A. Radio view
B. Service Template view
C. AP view
D. ESS Interface view
Answer: C

HP   certification HP0-Y35   certification HP0-Y35   certification HP0-Y35   HP0-Y35 examen

NO.4 Which roles are supported by the sFlow standard?
A. agent and collector only
B. probe and collector only
C. agent, collector, and analyzer
D. probe, collector, and analyzer
Answer: A

HP   HP0-Y35 examen   HP0-Y35

NO.5 You have been asked to deploy a guest wireless service within an A-Series solution in the
reception area of a marketing firm. The clients associated with the guest service should be
assigned to VLAN 10. In which view do you assign the VLAN to the wireless service?
A. System view
B. Service Template view
C. VLAN Interface view
D. ESS Interface view
Answer: D

certification HP   HP0-Y35   HP0-Y35 examen   HP0-Y35 examen

NO.6 Click the Exhibit button.
A network administrator is managing an HP A-Series Wireless Access Controller at the command
line interface (CLI). The administrator issues a command to view the contents of the controller
flash directory. Looking at the output, which access point models can the controller boot and
command to view the contents of the controller? flash directory. Looking at the output, which
access point models can the controller boot and manage? (Select two.)
A. HP WA2220-AG
B. HP WA2612-AGN
C. HP WA2620-AGN
D. HP WA2610E-AGN
E. HP WA2620E-AGN
Answer: B,C

HP   HP0-Y35   HP0-Y35   HP0-Y35 examen   certification HP0-Y35   HP0-Y35

NO.7 Click the Exhibit button.
An IRF-stack is being built using HP A5800 switches, and IRF member 1 will be connected to IRF
member 2 using IRF-port 2. Which IRF-port should it be connected to?
A. 1
B. 2
C. 3
D. any
Answer: A

HP examen   HP0-Y35   HP0-Y35   HP0-Y35 examen

NO.8 Using HP A5800 switches, which element must be configured in all switches involved in Layer 2
remote port mirroring?
A. remote-mirroring group
B. mirroring-ingress port
C. monitor-egress port
D. remote-probe VLAN
Answer: D

certification HP   certification HP0-Y35   HP0-Y35   HP0-Y35

NO.9 What are acceptable topologies for an IRF-Stack? (Select two.)
A. star
B. tree
C. daisy-chain
D. mesh
E. ring
Answer: C,E

HP   HP0-Y35   HP0-Y35   certification HP0-Y35

NO.10 In an IRF stack, which operational plane is centralized (in the Master) and which is distributed
(among all members)?
A. Management: centralized
Control: centralized
Forwarding: centralized
B. Management: distributed
Control: distributed
Forwarding: distributed
C. Management: centralized
Control: distributed
Forwarding: distributed
D. Management: distributed
Control: centralized
Forwarding: distributed
E. Management: centralized
Control: centralized
Forwarding: distributed
Answer: E

HP   HP0-Y35   HP0-Y35

NO.11 Click the Exhibit button.
You have been asked to configure the switching engine of an HP A3000-24G PoE+ Wireless
Switch. First, you log in to the CLI of the access controller and then move to the System view. You
then attempt to issue the partial command oap co and use the Tab key to complete it. However,
the CLI does not complete the command but issues a line return instead, as shown in the exhibit.
What must you do to connect to the CLI of the switching engine?
A. Return to the User view and then issue the command.
B. Enter the OAP view and then issue the command.
C. Use the CTRL+K key combination to access the CLI of the switching engine.
D. Telnet directly to the IPaddress of the switching engine and issue the command.
Answer: A

HP   certification HP0-Y35   HP0-Y35

NO.12 Given an HP A5800 switch that is in its factory default configuration, what happens after the
following command sequence? (Note: There is no save command.) system-view irf member 1
renumber 2 quit reboot
A. The IRF member ID will be 1.
B. The IRF member ID will be 2.
C. The IRF member ID will be assigned dynamically.
D. The IRF member ID will be "unknown."
Answer: B

HP   HP0-Y35 examen   HP0-Y35 examen

NO.13 After a MAD enabled IRF-stack splits, what happens to the part of the stack that entered Recovery
state?
A. All ports, except for the IRF-ports, BFD enabled ports, and console ports are shut down.
B. All ports, except for the IRF-ports, LACP enabled Link aggregation groups, console ports, and
manually excluded ports are shut down.
C. All ports, except for the IRF-ports, console ports, and manually excluded ports, are shut down.
D. All ports except for manually excluded ports are shut down.
Answer: C

HP   HP0-Y35   certification HP0-Y35   HP0-Y35 examen

NO.14 Click the Exhibit button.
When IRF with Distributed Link Aggregation is implemented at all layers of a LAN (Core,
Aggregation, and Access), which protocols can be replaced by IRF functions? (Select two.)
A. MSTP
B. LACP
C. BFD
D. NSF/GR
E. VRRP
Answer: A,E

certification HP   certification HP0-Y35   HP0-Y35 examen   HP0-Y35

NO.15 Which protocols/technologies can be used to implement IRF MAD? (Select two.)
A. NSF/GR
B. ICMP
C. IGMP
D. BFD
E. LACP
Answer: D,E

HP examen   HP0-Y35   HP0-Y35   HP0-Y35

On peut télécharger quelques parties de Q&A gratuites dans le site Pass4Test à propos de test Certification HP HP0-Y35. Vous pouvez tester notre fiabilité via le démo. Choisir Pass4Test, c'est-à-dire que vous êtes proche d'un pic ensuite de l'Industrie IT.