Si vous voulez se prouver une compétition et s'enraciner le statut dans l'industrie IT à travers de test Certification Hitachi HH0-220, c'est obligatoire que vous devez avior les connaissances professionnelles. Mais il demande pas mal de travaux à passer le test Certification Hitachi HH0-220. Peut-être d'obtenir le Certificat Hitachi HH0-220 peut promouvoir le tremplin vers l'Industrie IT, mais vous n'avez pas besoin de travailler autant dur à préparer le test. Vous avez un autre choix à faire toutes les choses plus facile : prendre le produit de Pass4Test comme vos matériaux avec qui vous vous pratiquez avant le test réel. La Q&A de Pass4Test est recherchée particulièrement pour le test IT.
Pass4Test est un catalyseur de votre succès de test Hitachi HH0-220. En visant la Certification de Hitachi, la Q7A de Pass4Test avec beaucoup de recherches est lancée. Si vous travillez dur encore juste pour passer le test Hitachi HH0-220, la Q&A Hitachi HH0-220 est un bon choix pour vous.
Code d'Examen: HH0-220
Nom d'Examen: Hitachi (HDS Certified Implmenter-Modular)
Questions et réponses: 109 Q&As
Vous aurez le service de la mise à jour gratuite pendant un an une fois que vous achetez le produit de Pass4Test. Vous pouvez recevoir les notes immédiatement à propos de aucun changement dans le test ou la nouvelle Q&A sortie. Pass4Test permet tous les clients à réussir le test Hitachi HH0-220 à la première fois.
La population de la Certification Hitachi HH0-220 est très claire dans l'Industrie IT. Pass4Test se contribue à vous aider à réussir le test, de plus, un an de la mise à jour gratuite pendant est gratuite pour vous. Pass4Test sera le catalyseur de la réalisation de votre rêve. Pour le succès demain, Pass4Test est votre von choix. Vous serez le prochain talent de l'Indutrie IT sous l'aide de Pass4Test.
Les produits de Pass4Test sont préparés pour le test Certification Hitachi HH0-220, y compris les formations et les informations ciblées au test Hitachi HH0-220. D'ailleurs, la Q&A de Pass4Test qui est impressionnée par la grande couverture des questions et la haute précision des réponses vous permet à réussir le test avec une haute note.
Si vous voulez ne se soucier plus à passer le test Hitachi HH0-220, donc vous devez prendre la Q&A de Pass4Test comme le guide d'étude pendant la préparation de test Hitachi HH0-220. C'est une bonne affaire parce que un petit invertissement peut vous rendre beaucoup. Utiliser la Q&A Hitachi HH0-220 offerte par Pass4Test peut vous assurer à réussir le test 100%. Pass4Test a toujours une bonne réputation dans l'Industrie IT.
HH0-220 Démo gratuit à télécharger: http://www.pass4test.fr/HH0-220.html
NO.1 A customer wants to start using ShadowImage on several of their existing Hitachi Unified Storage
systems. They would like a solution to centrally configure their Point-in-Time copies. Which product would
you recommend?
A. Hitachi Dynamic Replicator
B. Hitachi Universal Replicator
C. Business Continuity Manager
D. Hitachi Replication Manager
Answer: D
Hitachi HH0-220 HH0-220 HH0-220 examen HH0-220
NO.2 When implementing host access security for a LUN in a Hitachi Unified Storage system, to what is the
host WWN applied?
A. Host Group
B. Storage Group
C. Domain Group
D. Link Group
Answer: A
Hitachi examen HH0-220 certification HH0-220 HH0-220
NO.3 A Hitachi Unified Storage system is connected to a Solaris server. If you want to optimize performance
for the host I/Os, how do you determine the appropriate queue depth value?
A. Set queue depth to 1.
B. Use the operating system default value.
C. The value is set according to the results of the initial SCSI inquiry.
D. Using the Host installation guide for Fibre Channel.
Answer: D
certification Hitachi HH0-220 examen HH0-220 HH0-220 examen
NO.4 You have been asked to allocate storage from a Hitachi Unified Storage system to a cluster of AIX
hosts. The application owner wants you to make sure that the queue depth is set to 16 for all the LUNs.
Where do you define the queue depth?
A. on each LUN
B. on the server HBAs
C. on the WWNN Target Ports
D. on the WWPN Target Ports
Answer: A
certification Hitachi HH0-220 HH0-220 examen HH0-220 examen
NO.5 What is Hitachi Data System's recommended practice for zoning?
A. port-based zoning
B. zoning is optional
C. single HBA zoning (one HBA per zone)
D. single operation system zoning (all HBAs from one OS in a zone)
Answer: C
Hitachi examen certification HH0-220 certification HH0-220 certification HH0-220 certification HH0-220
NO.6 A customer has identified a performance bottleneck with Online Transaction Processing (OLTP)
production host LUNs. The performance improvement plan includes a change to the Hitachi Dynamic Link
Manager load balancing algorithm which is currently set to Round Robin. Which setting would you
recommend?
A. Least I/Os
B. Least blocks
C. Extended Round Robin
D. Extended Least blocks
Answer: A
certification Hitachi HH0-220 examen HH0-220
NO.7 A customer will be implementing a Hitachi Unified Storage File Module two-node NAS cluster with one
SMU. How many power connections are necessary?
A. 3
B. 4
C. 5
D. 6
Answer: C
Hitachi certification HH0-220 HH0-220 HH0-220 HH0-220
NO.8 What needs to be replaced in case of a local memory DIMM failure on a Hitachi Unified Storage
controller?
A. the controller
B. the local memory DIMM
C. the controller and the local memory DIMM
D. the controller, the local memory DIMM and the cache DIMMs
Answer: C
Hitachi HH0-220 examen HH0-220 examen HH0-220 examen HH0-220 certification HH0-220
NO.9 You have just allocated four 3TB LUNs from a Hitachi Unified Storage System to a set of ESX 4.x
servers. The VMware administrator can see volumes that are assigned to the servers from an older
storage array, but not the volumes you have just allocated. What is the most likely cause?
A. The FC switch ports need to be disabled/enabled to force the HBAs to re-login to the fabric.
B. This a newer storage array with an older version of ESX so the HBA drivers need to be updated.
C. ESX 4.x servers cannot recognize volumes that are 2TB or larger.
D. The rescan function in VMware is not working, so both servers need to be rebooted.
Answer: C
Hitachi examen HH0-220 HH0-220 HH0-220 HH0-220
NO.10 What are three characteristics of the Hitachi Unified Storage systems active/active controller design?
(Choose three.)
A. SNM2 GUI is used to turn on active/active controller processing.
B. Workload is automatically balanced between controllers.
C. When creating a LUN the default controller must be selected.
D. The processor of Ctlr0 can access the Fibre Channel (FC) ports of Ctrl1.
E. Non disruptive firmware upgrade is possible even if a host is connected by only one path.
Answer: B,D,E
Hitachi HH0-220 examen HH0-220 examen
NO.11 What are two ways to register a new Hitachi Unified Storage system with Storage Navigator Modular 2?
(Choose two.)
A. SNM2 can scan a range of IP addresses.
B. SNM2 can import a .CSV file containing IP addresses.
C. The controller IP addresses can be entered into SNM2.
D. SNM2 automatically detects connected arrays using UDP broadcasts.
Answer: A,C
Hitachi HH0-220 examen HH0-220 examen HH0-220
NO.12 Which two operations can be performed with the Web utility on a Hitachi Unified Storage system?
(Choose two.)
A. Take a simple trace.
B. Install license keys.
C. Perform an online microcode update.
D. Perform an offline microcode update.
Answer: A,D
Hitachi HH0-220 HH0-220 examen
NO.13 You are implementing a Hitachi Unified Storage File Module cluster with a single SMU. How do you run
the smu-config script?
A. Connect an Ethernet cable and login as supervisor.
B. Connect a serial null-modem cable and login as supervisor.
C. Connect an Ethernet cable and login as root.
D. Connect a serial null-modem cable and login as root.
Answer: D
Hitachi examen HH0-220 examen certification HH0-220 HH0-220 HH0-220 examen HH0-220
NO.14 A customer has a Hitachi Unified Storage (HUS) system model 110 configured with iSCSI I/O interface
boards. They now want to connect it to a FC-SAN and have purchased the FC-Option upgrade to do so.
Which two tasks must be performed on the HUS system? (Choose two.)
A. Set the HUS FC port topology as Fabric.
B. Set the HUS FC port topology as Point-to-Point.
C. Install and enable the FC-Option on the HUS.
D. Install and enable the FC Expansion Board.
Answer: B,C
Hitachi examen HH0-220 examen HH0-220
NO.15 What are two effects of persistent binding? (Choose two.)
A. Persistent binding can speed up path failover.
B. Persistent binding guarantees Command Device security.
C. Persistent binding can speed up the server boot process.
D. Persistent binding guarantees that target assignments are preserved between reboots.
Answer: C,D
Hitachi certification HH0-220 HH0-220 examen HH0-220 examen certification HH0-220
NO.16 A customer wants to create a multi-path environment for a specific Redhat Linux application on a
Hitachi Unified Storage system. They have created Host Groups on all of the available ports and mapped
the logical units accordingly. Which two multi-pathing options can be used for active/active connectivity?
(Choose two.)
A. Device Mapper
B. Multipath I/O (MPIO)
C. Hitachi Dynamic Link Manager
D. Multiplexed I/O (MPxIO)
Answer: A,C
Hitachi examen HH0-220 examen certification HH0-220
NO.17 How should the Hitachi Unified Storage systems dual power supplies be connected?
A. by FS6 circuits breakers
B. only one should be connected, the other being standby
C. by adjacent sockets on a single power distribution unit
D. by two independent and appropriately rated power distribution units
Answer: D
certification Hitachi HH0-220 certification HH0-220 HH0-220 certification HH0-220
NO.18 A customer wants to migrate data between two Hitachi Unified Storage systems using TrueCopy. What
are two requirements? (Choose two.)
A. The DM-LU must be greater than 10GB.
B. There must be FC connectivity between the arrays.
C. The P-Vol and S-Vol size must be equal.
D. A Command Device must be created.
Answer: A,C
Hitachi HH0-220 HH0-220 examen HH0-220 HH0-220 examen certification HH0-220
NO.19 You want to configure SNMP on a Hitachi Unified Storage system. The license key is already installed
and enabled. What are two key steps when configuring SNMP? (Choose two.)
A. Import the MIB file into the HUS.
B. Install an SNMP Manager on the HUS.
C. Create the SNMP environment file in the HUS.
D. Register the SNMP configuration files in the HUS.
Answer: C,D
Hitachi HH0-220 HH0-220
NO.20 You are upgrading a Hitachi Unified Storage (HUS) system with the File Module option. Which
combination is required to support this upgrade?
A. FC connectivity between the HUS and the File Module plus the Hitachi BOS F software bundle
B. 10GbE connectivity between the HUS and the File Module plus the Hitachi BOS M software bundle
C. FCoE connectivity between the HUS and the File Module plus the Hitachi BOS F software bundle
D. FC connectivity between the HUS and the File Module plus the Hitachi BOS N software bundle
Answer: A
Hitachi examen HH0-220 HH0-220 examen certification HH0-220
Si vous travaillez quand même très dur et dépensez beaucoup de temps pour préparer le test Hitachi HH0-220, mais ne se savez pas du tout c'est où le raccourci pour passer le test certification, Pass4Test peut vous donner une solution efficace. Vous vous sentirez magiquement jouer un effet multiplicateur.
没有评论:
发表评论