Il faut une bonne préparation et aussi une série de connaissances professionnelles complètes pour réussir le test Microsoft 070-544-VB. La ressourece providée par Pass4Test peut juste s'accorder votre demande.
Vous pouvez télécharger le démo gratuit pour prendre un essai. Vous aurez plus confiance sur Pass4Test. N'hésitez plus à choisir la Q&A Microsoft 070-544-VB comme votre guide d'étude.
Code d'Examen: 070-544-VB
Nom d'Examen: Microsoft (TS: Ms Virtual Earth 6.0, Application Development)
Questions et réponses: 67 Q&As
Le Pass4Test est un site qui peut offrir les facilités aux candidats et aider les candidats à réaliser leurs rêve. Si vous êtes souci de votre test Certification, Pass4Test peut vous rendre heureux. La haute précision et la grande couverture de la Q&A de Pass4Test vous aidera pendant la préparation de test. Vous n'aurez aucune raison de regretter parce que Pass4Test réalisera votre rêve.
Pass4Test a de formations plus nouvelles pour le test Microsoft 070-544-VB. Les experts dans l'industrie IT de Pass4Test profitant leurs expériences et connaissances professionnelles à lancer les Q&As plus chaudes pour faciliter la préparation du test Microsoft 070-544-VB à tous les candidats qui nous choisissent. L'importance de Certification Microsoft 070-544-VB est de plus en plus claire, c'est aussi pourquoi il y a de plus en plus de gens qui ont envie de participer ce test. Parmi tous ces candidats, pas mal de gens ont réussi grâce à Pass4Test. Ces feedbacks peuvent bien prouver nos produits essentiels pour votre réussite de test Certification.
Le produit de Pass4Test peut assurer les candidats à réussir le test Microsoft 070-544-VB à la première fois, mais aussi offrir la mise à jour gratuite pendant un an, les clients peuvent recevoir les ressources plus nouvelles. Pass4Test n'est pas seulement un site, mais aussi un bon centre de service.
Pass4Test est un site web qui vous donne plus de chances à passer le test de Certification Microsoft 070-544-VB. Le résultat de recherche sortis par les experts de Pass4Test peut assurer que ce sera vous ensuite qui réussirez le test Microsoft 070-544-VB. Choisissez Pass4Test, choisissez le succès. L'outil de se former de Pass4Test est bien efficace. Parmi les gens qui ont déjà passé le test, la majorité a préparé le test avec la Q&A de Pass4Test.
070-544-VB Démo gratuit à télécharger: http://www.pass4test.fr/070-544-VB.html
NO.1 You are integrating third-party data into a Virtual Earth 6.0 application. The data that is retrieved from
the third party is stored in an array named Results. The Results array is stored inside a Web handler. The
data is stored in the following format.
The Web handler uses the GeoRSSFeed class to accept items of type GeoRSSItem. The class contains
the ToString() method that writes the GeoRSS feed to a string.
The Web handler GeoRSS integration is defined by the following code segment. (Line numbers are
included for reference only.)
You need to encode the data inside the Results array into the GeoRSS format.
Which code segment should you insert at line 05?
A. Dim objEnumerator As IEnumerator
Dim Keys As Collections.Generic.Dictionary(Of String, _ String).KeyCollection = Results(i).Keys()
Dim curKey As String
objEnumerator = Keys.GetEnumerator()
Do While objEnumerator.MoveNext
curKey = objEnumerator.Current
curItem.Add(curKey, Results(i)(curKey))
Loop
B. curItem.Add("title", Results(i)("name"))
curItem.Add("description", Results(i)("address"))
curItem.Add("latitude", Results(i)("latitude"))
curItem.Add("longitude", Results(i)("longitude"))
curItem.Add("icon", Results(i)("thumbnail"))
C. curItem.Add("title", Results(i)("name"))
curItem.Add("description", String.Format("{0}|{1}", _
Results(i)("address"), Results(i)("thumbnail")))
curItem.Add("latitude", Results(i)("latitude"))
curItem.Add("longitude", Results(i)("longitude"))
D. curItem.Add("name", Results(i)("name"))
curItem.Add("address", string.Format("{0}|{1}", _
Results(i)("address"), Results(i)("thumbnail"))
curItem.Add("latitude", Results(i)("latitude"))
curItem.Add("longitude", Results(i)("longitude"))
Answer: C
Microsoft 070-544-VB 070-544-VB 070-544-VB examen 070-544-VB 070-544-VB
NO.2 You are writing a code segment for a Virtual Earth 6.0 application. The code segment returns data for
multiple locations to a client-side JavaScript function that makes the initial request.
The returned data contains the following properties for each location:
ID
Latitude
Longitude
Address
You need to format all locations and their properties in JavaScript Object Notation (JSON) format.
Which code segment should you use?
A. var results = new Array();
results[0] = 123;
results[1] = 40.0;
results[2] = -74.0;
results[3] = " 123 Main St .";
B. var results = new Array();
results[0] = new Array();
results[0][0] = 123;
results[0][1] = 40.0;
results[0][2] = -74.0;
results[0][3]= " 123 Main St .";
C. var results = {
ID: 123,
Latitude: 40.0,
Longitude: -74.0,
Address: " 123 Main St ."
};
D. var results = {
0:{
ID: 123,
Latitude: 40.0,
Longitude: -74.0,
Address: " 123 Main St "
}
};
Answer: D
Microsoft 070-544-VB examen certification 070-544-VB certification 070-544-VB
NO.3 You are updating a Virtual Earth 6.0 store locator. A database table named Stores contains the City and
State fields. A Microsoft SQL Server 2005 function named CalculateDistance measures the distance
between two points.
The store locator contains a stored procedure named LookupStores that retrieves the names of stores
located in a given city and state. The city and state are passed in as parameters to the stored procedure.
You need to extend the store locator to support a proximity search within a given radius.
Which two tasks should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Add a Radius field to the Stores table.
B. Add a Distance field to the Stores table.
C. Add Latitude and Longitude fields to the Stores table.
D. Extend the LookupStores stored procedure to use CalculateDistance.
E. Create a new stored procedure that uses CalculateDistance along with the result set from the
LookupStores stored procedure.
F. Create a new stored procedure that uses CalculateDistance along with the entire data set from the
Stores table.
Answer: C AND F
certification Microsoft 070-544-VB 070-544-VB examen 070-544-VB 070-544-VB
NO.4 You deploy a Virtual Earth 6.0 application that uses Microsoft ASP.NET Asynchronous JavaScript and
XML (AJAX) implementation to retrieve data.
The myAjaxCallback function evaluates any AJAX response. The function contains the following code
segment. (Line numbers are included for reference only.)
At the time the request was made, the server was overloaded. When the server processed the AJAX
request, the server returned an error message.
You need to ensure that the application does not produce a fatal exception due to the error generated
from the AJAX response.
Which code segment should you insert at line 03?
A. If(xmlHttp.status == 200){
eval(xmlHttp.responseText);
}
else{
// Update user with status here.
}
B. try{
eval(xmlHttp.responseText);
}
catch(error){
// Update user with status here.
}
C. try{
eval(xmlHttp.responseText);
}
catch(error){
eval(xmlHttp.responseXML);
}
D. try{
eval(xmlHttp.responseText);
}
catch(error){
if(xmlHttp.status == 200){
eval(xmlHttp.responseText);
}
}
Answer: A
Microsoft certification 070-544-VB 070-544-VB examen 070-544-VB
NO.5 You are creating a custom tile set by using Microsoft MapCruncher.
The tile set must overlay a weather map image in a Virtual Earth 6.0 application by using MapCruncher.
You need to perform two tasks before using MapCruncher to create the custom tile set.
Which two tasks should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Split the weather map image into tiles.
B. Obtain the latitude and longitude coordinates for the corners of the weather map image.
C. Apply the proper alpha filter to the weather map image to display any transparent portions on the
Virtual Earth map.
D. Obtain low resolution weather map images for low zoom levels and high resolution weather map
images for high zoom levels.
Answer: B AND C
certification Microsoft certification 070-544-VB 070-544-VB
NO.6 Your Microsoft MapPoint Web Service (MWS) User Id is 124566, and your MWS password is
P@ssw0rd.
You need to use MWS to create an application.
Which code segment should you use?
A. Dim appCredential As New System.Net.NetworkCredential("124566", "P@ssw0rd")
B. Dim appCredential = New System.Security.Principal.NTAccount("124566", "P@ssw0rd")
C. Dim appCredential As New System.Security.Principal.GenericIdentity("124566", "P@ssw0rd")
D. Dim appCredential As New System.EnterpriseServices.SecurityIdentity("124566", "P@ssw0rd")
Answer: A
Microsoft 070-544-VB 070-544-VB examen 070-544-VB examen 070-544-VB
NO.7 You are creating a Virtual Earth 6.0 application that retrieves locations from a Microsoft SQL Server
2005 database.
A stored procedure will be used to retrieve only locations that lie within the currently displayed map area.
You need to define the boundary within which the locations displayed on the map must lie.
How should you define the boundary?
A. points represented by the bottom-right and top-left pixel coordinates
B. points represented by the bottom-right and top-left latitude and longitude coordinates
C. the center point of a circle whose radius is equal to the size of the map based on pixel coordinates
D. the center point of a circle whose radius is equal to the size of the map based on latitude and longitude
coordinates
Answer: B
Microsoft examen 070-544-VB examen 070-544-VB
NO.8 You are managing Microsoft MapPoint Web Service (MWS) data in an application by using the
Customer Services site. The application uses the DS_ONE data source stored on the Customer Services
site.
The application displays several records in the wrong locations on the map.
You need to display these records correctly on the map.
What should you do?
A. View the data source geocoding results. Filter on match code. Manually edit all the resulting locations
through the Customer Services site.
B. Download the data source. Remove the latitude and longitude data. Re-upload the corrected data to
the Customer Services site.
C. Download the data source. Update all the locations by using a Find or FindAddress call. Re-upload the
corrected data to the Customer Services site.
D. Download the data source. Update each bad geocode by using a Find or FindAddress call. Re-upload
the corrected data to the Customer Services site.
Answer: A
Microsoft 070-544-VB examen certification 070-544-VB certification 070-544-VB 070-544-VB
NO.9 You are creating a Virtual Earth 6.0 application. The application will use data that is stored in the
Microsoft MapCruncher output format.
The MapCruncher output is defined in the following manner:
var tileSrc = http://dev.live.com/virtualearth/sdk/layers/layer1
You need to ensure that the application displays the data as a new layer on the Virtual Earth map.
Which code segment should you use?
A. var tileSourceSpec = new VETileSourceSpecification("layer1/%4.png", tileSrc);
map.AddTileLayer(tileSourceSpec, true);
B. var tileSourceSpec = new VETileSourceSpecification("layer1", tileSrc + /%4);
map.AddTileLayer(tileSourceSpec, true);
C. var tileSourceSpec = new VETileSourceSpecification("layer1", tileSrc + "/%4.png");
map.AddTileLayer(tileSourceSpec, true);
D. var tileSourceSpec = new VETileSourceSpecification("layer1", tileSrc + /%1.png);
map.AddTileLayer(tileSourceSpec, true);
Answer: C
Microsoft 070-544-VB certification 070-544-VB 070-544-VB
NO.10 A Virtual Earth 6.0 application loads locations from a local Microsoft SQL Server 2005 database. You
update locations in the database manually.
You plan to automate the manual process.
You need to ensure that the automation process updates the maximum number of locations in the least
amount of time.
What should you do?
A. Call the Find method for each location by using Microsoft MapPoint Web Service.
B. Call the FindAddress method for each location by using Microsoft MapPoint Web Service.
C. Push all locations to Customer Data Services by using the UploadSpecification class, and retrieve the
results.
D. Push all locations to Customer Data Services by using the BatchGeocodeSpecification class, and
retrieve the results.
Answer: D
certification Microsoft 070-544-VB examen 070-544-VB 070-544-VB
Vous pouvez comparer un peu les Q&As dans les autres sites web que lesquelles de Pass4Test, c'est pas difficile à trouver que la Q&A Microsoft 070-544-VB est plus complète. Vous pouvez télécharger le démo gratuit à prendre un essai de la qualité de Pass4Test. La raison de la grande couverture des questions et la haute qualité des réponses vient de l'expérience riche et la connaissances professionnelles des experts de Pass4Test. La nouvelle Q&A de Microsoft 070-544-VB lancée par l'équipe de Pass4Test sont bien populaire par les candidats.
没有评论:
发表评论