Pass4Test est un site d'offrir l'outil de formation convenable pour les candidats de test Certification IT. Le produit de Pass4Test peut aider les candidats à économiser les temps et les efforts. L'outil de formation est bien proche que test réel. Vous allez réussir le test 100% avec l'aide de test simulation de Pass4Test. C'est une bonne affaire à prendre le Certificat IT en coûtant un peu d'argent. N'hésitez plus d'ajouter l'outil de formation au panier.
Si vous hésitez encore à nous choisir, vous pouvez tout d'abord télécharger le démo gratuit dans le site Pass4Test pour connaître mieux la fiabilité de Pass4Test. Nous avons la confiance à vous promettre que vous allez passer le test Adobe 9A0-164 à la première fois.
Beaucoup de travailleurs dans l'Industrie IT peut obenir un meilleur travail et améliorer son niveau de vie à travers le Certificat Adobe 9A0-164. Mais la majorité des candidats dépensent beaucoup de temps et d'argent pour préparer le test, ça ne coûte pas dans cette société que le temps est tellement précieux. Pass4Test peut vous aider à économiser le temps et l'effort pendant le cours de la préparation du test Adobe 9A0-164. Choisir le produit de Pass4Test particulier pour le test Certification Adobe 9A0-164 vous permet à réussir 100% le test. Votre argent sera tout rendu si malheureusement vous ne passez pas le test.
La solution offerte par Pass4Test comprenant un test simulation bien proche de test réel Adobe 9A0-164 peut vous assurer à réussir 100% le test Adobe 9A0-164. D'ailleur, le service de la mise à jour gratuite est aussi pour vous. Maintenant, vous pouvez télécharger le démo gratuit pour prendre un essai.
Pass4Test est un bon catalyseur du succès pour les professionnels IT. Beaucoup de gens passer le test Adobe 9A0-164 avec l'aide de l'outil formation. Les experts profitent leurs expériences riches et connaissances à faire sortir la Q&A Adobe 9A0-164 plus nouvelle qui comprend les exercices de pratiquer et le test simulation. Vous pouvez passer le test Adobe 9A0-164 plus facilement avec la Q&A de Pass4Test.
Pass4Test est un site qui peut réalise le rêve de beaucoup de professionnels. Pass4Test peut vous donner un coup de main pour réussir le test Certification Adobe 9A0-164 via son guide d'étude. Est-ce que vous vous souciez de test Certification Adobe 9A0-164? Est-ce que vous êtes en cours de penser à chercher quelques Q&As à vous aider? Pass4Test peut résoudre ces problèmes. Les documentations offertes par Pass4Test peuvent vous provider une préparation avant le test plus efficace. Le test de simulation de Pass4Test est presque le même que le test réel. Étudier avec le guide d'étude de Pass4Test, vous pouvez passer le test avec une haute note.
Code d'Examen: 9A0-164
Nom d'Examen: Adobe (Adobe Captivate® 5.5 ACE Exam)
Questions et réponses: 161 Q&As
9A0-164 Démo gratuit à télécharger: http://www.pass4test.fr/9A0-164.html
NO.1 Your company standards state that the corporate logo must be used in all the content you create.How
should you implement this in your eLearning course?
A.Add the logo to the Master slide.
B.Paste the logo on all the slides.
C.Paste the logo on the first slide and select the timing as rest of the slide.
D.Make the logo as a background image for all the slides.
Answer: A
Adobe 9A0-164 examen 9A0-164 examen 9A0-164
NO.2 You have recorded a Full Motion Recording (FMR) and need to delete some frames.What should you
do?
A.You CANNOT edit the FMR.Instead, re-record the lesson being careful not to include any extra mouse
actions.
B.Open the FMR in Flash for editing.Import the edited FMR back into Captivate.
C.Go to the slide containing the FMR.In Properties Inspector > FMR Edit Options, choose Trim.
D.On the Timeline, double-click the FMR.The FMR Editor will open giving you the ability to edit the
FMR.Remove frames, click Save, and return to Captivate.
Answer: C
Adobe examen certification 9A0-164 certification 9A0-164 9A0-164 9A0-164
NO.3 Which two slide placeholders can be added to project templates? (Choose two.)
A.Recording Slide Placeholder
B.Image Slide Placeholder
C.Animation Slide Placeholder
D.Question Slide Placeholder
E.PowerPoint Slide Placeholder
Answer: A,D
Adobe 9A0-164 9A0-164
NO.4 You want to combine multiple projects and publish them using Aggregator.What should you do?
A.Ensure that all project filenames have no spaces.
B.Ensure that all of the modules have been published as SWF.
C.Ensure that all of the modules have been published as EXE.
D.Create a master slide with click boxes that link to each project.
Answer: B
Adobe 9A0-164 9A0-164 certification 9A0-164
NO.5 You are creating a software simulat-ion on how to draw using a Paintbrush in Adobe Photoshop.Which
is the most efficient mode of recording this simulat-ion?
A.Automatic
B.Full Motion
C.Manual
D.Custom
Answer: B
certification Adobe 9A0-164 certification 9A0-164
NO.6 You are creating a simul-ation to explain how a particular dialog in Adobe Photoshop functions.Which
command should you choose to record this simul-ation?
A.Application > Snap to Custom Size.
B.Application > Snap to Application Region.
C.Screen Area > Snap to Full Screen.
D.Screen Area > Snap to Application Region.
Answer: B
Adobe examen 9A0-164 9A0-164 examen 9A0-164
NO.7 You are creating a compliance course and need the course to be non-functional after a certain time
period.Which option in the Preferences dialog should you select?
A.Under General Settings category, select Project Expiry Date.
B.Under Project Publish Settings category, select Project Expiry Date.
C.Under Project Start and End category, select Project Expiry Date.
D.Under Project Information category, select Project Expiry Date.
Answer: C
Adobe examen 9A0-164 examen 9A0-164 certification 9A0-164 9A0-164 examen 9A0-164 examen
NO.8 You are creating eLearning content for high definition output.Which project size should you choose?
A.320 x 240
B.800 x 600
C.1024 x 768
D.1280 x 720
Answer: D
Adobe 9A0-164 examen 9A0-164 certification 9A0-164
NO.9 You are creating a course for a wide audience and you are NOT sure of the screen resolution they are
using.Which project size should you choose?
A.200 x 200
B.320 x 240
C.800 x 600
D.1280 x 720
Answer: C
certification Adobe 9A0-164 9A0-164 examen 9A0-164
NO.10 What is the most efficient way to capture actions outside the recording area?
A.Record two videos, each showing the actions in their respective recording areas.After recording, import
the slides and objects from one project into the other.
B.Use the Custom recording mode and select Force all actions into the Recording Area.
C.When creating the new project, select a Recording area that will be big enough to capture everything
you'll be doing on your screen.
D.Select either Automatic or Manual Panning prior to recording thesimulat-ion.
Answer: D
certification Adobe 9A0-164 certification 9A0-164
NO.11 Which is the extension of a project created using Aggregator?
A.CPTA
B.CPTX
C.SWF
D.AGGR
Answer: D
Adobe 9A0-164 9A0-164 9A0-164 9A0-164 examen
NO.12 You are creating a branching course.Which is the most effective workspace to use for this project?
A.Classic
B.Effects
C.Navigation
D.Review
Answer: C
Adobe 9A0-164 examen certification 9A0-164
NO.13 You have to add a Full Motion Recording (FMR) to your project.You do NOT want the mouse to appear
in the recorded slide.What should you do?
A.In the Preferences dialog, under Recording FMR category, uncheck Show Mouse in Full Motion
Recording Mode.
B.In the Preferences dialog, under Recording Settings category, uncheck Show Mouse in Full Motion
Recording Mode.
C.In the Preferences dialog, under Recording FMR category, select Hide Mouse in Full Motion Recording
Mode.
D.In the Preferences dialog, under Recording Settings category, select Hide Mouse in Full Motion
Recording Mode.
Answer: A
Adobe certification 9A0-164 certification 9A0-164 9A0-164 9A0-164
NO.14 What is the YouTube Widescreen Standard Dimensions available in Captivate project presets?
A.640x480
B.640x360
C.800x600
D.1024x768
Answer: B
Adobe examen 9A0-164 9A0-164 examen 9A0-164
NO.15 What is the difference between a project template and a master slide?
A.Project templates can contain master slides; master slides cannot contain templates.
B.Project templates cannot contain master slides; master slides can contain templates.
C.Placeholders can be used in master slides but not in project templates.
D.Placeholders cannot be used in project templates.
Answer: A
certification Adobe 9A0-164 examen 9A0-164 examen
NO.16 You have created a course using a project template that contains a caption placeholder for onscreen
text.How will you add text to this placeholder?
A.Choose Edit > Add Text to Placeholder.
B.Right-click the placeholder and select Add Text to Placeholder.
C.Double-click the placeholder.
D.In the Properties Inspector, under General accordion, click Add Text to Placeholder.
Answer: C
Adobe examen 9A0-164 examen 9A0-164 certification 9A0-164
NO.17 You want to record a software simulat-ion using the Snap to Application Region option and you end up
selecting a wrong region.How should you select a different region?
A.Exit the Capture dialog and restart the workflow.
B.Click Configure Region and select a new region.
C.Click Reconfigure Region and select a new region.
D.Once selected, you cannot change the region.
Answer: C
certification Adobe certification 9A0-164 9A0-164
NO.18 You modify the Classic workspace according to your project requirements.Later, you want to go back
to the default Classic settings.What should you do?
A.Choose Window > Workspace > Classic.
B.Choose Window > Workspace > Reset Classic.
C.Choose File > Workspace > Classic.
D.Choose File > Workspace > Reset Classic.
Answer: B
certification Adobe certification 9A0-164 9A0-164 9A0-164 examen
NO.19 You need to publish your project to Apple iPad.Which default preset should you choose?
A.Apple iPad (1024x768)
B.Apple iPad (800x600)
C.Apple iPad (1440x1080)
D.Apple iPad (1280x720)
Answer: A
Adobe 9A0-164 9A0-164 examen 9A0-164 9A0-164 certification 9A0-164
NO.20 You created a software simulat-ion and noticed that none of the new windows you opened during the
recording process are recorded.What should you have done prior to creating the simulat-ion?
A.In the Preferences dialog, set the Global Default to Move New Windows Inside Recording Area.
B.In the Preferences dialog, click Recording Settings and select Move New Windows Inside Recording
Area.
C.During the recording process, pause the recording, drag the new window inside the capture area,
resume recording and then manually create a screen capture.
D.When creating a softwaresimulat-ion, always use a project template.
Answer: B
Adobe 9A0-164 examen 9A0-164 certification 9A0-164
Au 21er siècle, il manque encore grand nombreux de gens qualifié de IT. Le test Certificat IT est une bonne façon à examiner les hommes de talent. Ce n'est pas un test facile à réussir. Un bon choix de formation est une assurance pour le succès de test. Le test simulation est bien proche que test réel. Vous pouvez réussir 100%, bien que ce soit la première à participer le test.
没有评论:
发表评论