Pass4Test, où vous pouvez trouver les conseils et les documentations de test Certification Microsoft 70-511, est un siteweb remarquable offrant les données à préparer le test IT. Les documentations partiels et les mis en nouveau sont offerts gratuitement dans le site de Pass4Test. D'ailleurs, nos experts profitent de leurs expériences et leurs efforts à lancer sans arrêts les Q&A plus proches au test réel. Vous allez passer votre examen plus facile.
Il y a beaucoup de gans ambitieux dansn l'Industrie IT. Pour monter à une autre hauteur dans la carrière, et être plus proche du pic de l'Industrie IT. On peut choisir le test Microsoft 070-536-VB à se preuver. Mais le taux du succès et bien bas. Participer le test Microsoft 070-536-VB est un choix intelligent. Dans l'Industrie IT de plus en plus intense, on doit trouver une façon à s'améliorer. Vous pouvez chercher plusieurs façons à vous aider pour réussir le test.
Choisissez le Pass4Test, choisissez le succès. Le produit offert par Pass4Test vous permet à réussir le test Microsoft 070-410. C'est necessaire de prendre un test simulation avant participer le test réel. C'est une façon bien effective. Choisir Pass4Test vous permet à réussir 100% le test.
Le suucès n'est pas loin de vous une fois que vous choisissez le produit de Q&A Microsoft 070-536-VB de Pass4Test.
Code d'Examen: 70-511
Nom d'Examen: Microsoft (TS: Windows Applications Development with Microsoft .NET Framework 4)
Questions et réponses: 156 Q&As
Code d'Examen: 070-536-VB
Nom d'Examen: Microsoft (TS:MS.NET Framework 2.0-Application Develop Foundation)
Questions et réponses: 173 Q&As
Code d'Examen: 070-410
Nom d'Examen: Microsoft (Installing and Configuring Windows Server 2012)
Questions et réponses: 188 Q&As
Généralement, les experts n'arrêtent pas de rechercher les Q&As plus proches que test Certification. Les documentations offertes par les experts de Pass4Test peuvent vous aider à passer le test Certification. Les réponses de nos Q&As ont une précision 100%. C'est facile à obtenir le Certificat de Microsoft après d'utiliser la Q&A de Pass4Test. Vous aurez une space plus grande dans l'industrie IT.
Vous allez choisir Pass4Test après essayer une partie de Q&A Microsoft 70-511 (gratuit à télécharger). Le guide d'étude produit par Pass4Test est une assurance 100% à vous aider à réussir le test Certification Microsoft 70-511.
Pass4Test est un site à offrir les Q&As de tout les tests Certification IT. Chez Pass4Test, vous pouvez trouvez de meilleurs matériaux. Nos guides d'étude vous permettent de réussir le test Certification Microsoft 070-536-VB sans aucune doute, sinon nous allons rendre votre argent d'acheter la Q&A et la mettre à jour tout de suite, en fait, c'est une situation très rare. Bien que il existe plusieurs façons à améliorer votre concurrence de carrière, Pass4Test est lequel plus efficace : Moins d'argent et moins de temps dépensés, plus sûr à passer le test Certification. De plus, un an de service après vendre est gratuit pour vous.
70-511 Démo gratuit à télécharger: http://www.pass4test.fr/70-511.html
NO.1 You use Microsoft .NET Framework 4 to create a Windows Presentation Foundation (WPF) application.
The application has a window named MainWindow that has a StackPanel control named sp as the root
element.
You want to create a Button control that contains a TextBlock control with the "Save" Text property.
You need to create the control dynamically and add the control to sp.
Which code segment should you write in the constructor of the MainWindow class?
A. Button btn = new Button();
TextBlock text = new TextBlock();
text.Text = "Save";
btn.Content = text;
sp.DataContext = btn;
B. Button btn = new Button();
TextBlock text = new TextBlock();
text.Text = "Save";
btn.Content = text;
sp.Children.Add(btn);
C. Button btn = new Button();
TextBlock text = new TextBlock();
text.Text = "Save";
sp.Children.Add(btn);
sp.Children.Add(text);
D. Button btn = new Button();
TextBlock text = new TextBlock();
text.Text = "Save";
btn.ContentTemplateSelector.SelectTemplate(text, null);
sp.Children.Add(btn);
Answer: B
certification Microsoft 70-511 examen certification 70-511
NO.2 You use Microsoft .NET Framework 4 to create a Windows Presentation Foundation (WPF)
application.
You write the following code segment.
public class Contact { private string _contactName;
public string ContactName {
get { return _contactName; }
set {
if (string.IsNullOrEmpty(value))
throw new ApplicationException("Contact name is required");
_contactName = value;
}
}
}
You add the following code fragment in a WPF window control.
<TextBox Text="{Binding Path=ContactName, ValidatesOnExceptions=True,
UpdateSourceTrigger=PropertyChanged}" />
The TextBox control is data-bound to an instance of the Contact class. You plan to implement an
ErrorTemplate in the TextBox control.
You need to ensure that the validation error message is displayed next to the TextBox control. Which code
fragment should you use?
A. <ControlTemplate>
<DockPanel>
<AdornedElementPlaceholder Name="box" />
<TextBlock Text="{Binding ElementName=box,
Path=AdornedElement.(Validation.Errors)[0].ErrorContent}" Foreground="Red" />
</DockPanel>
</ControlTemplate>
B. <ControlTemplate>
<DockPanel>
<AdornedElementPlaceholder Name="box" />
<TextBlock Text="{Binding ElementName=box, Path=(Validation.Errors)[0].Exception.Message}"
Foreground="Red" />
</DockPanel>
</ControlTemplate>
C. <ControlTemplate>
<DockPanel>
<ContentControl Name="box" />
<TextBlock Text="{Binding ElementName=box,
Path=ContentControl.(Validation.Errors)[0].ErrorContent}" Foreground="Red" />
</DockPanel>
</ControlTemplate>
D. <ControlTemplate>
<DockPanel> <ContentControl Name="box" />
<TextBlock Text="{Binding ElementName=box, Path=(Validation.Errors)[0].Exception.Message}"
Foreground="Red" />
</DockPanel>
</ControlTemplate>
Answer: A
certification Microsoft certification 70-511 70-511 examen 70-511
NO.3 You use Microsoft Visual Studio 2010 and Microsoft .
NET Framework 4 to create a Windows Presentation Foundation (WPF) application.
You create a WPF window in the application.
You add the following code segment to the application.
public class ViewModel
{
public CollectionView Data { get; set; }
}
public class BusinessObject
{
public string Name { get; set; }
}
The DataContext property of the window is set to an instance of the ViewModel class.
The Data property of the ViewModel instance is initialized with a collection of BusinessObject objects.
You add a TextBox control to the Window.
You need to bind the Text property of the TextBox control to the Name property of the current item of the
CollectionView of the DataContext object.
You also need to ensure that when a binding error occurs, the Text property of the TextBox control is set to
N/A .
Which binding expression should you use?
A. { Binding Path=Data/Name, FallbackValue='N/A' }
B. { Binding Path=Data.Name, FallbackValue='N/A' }
C. { Binding Path=Data/Name, TargetNullValue='N/A' }
D. { Binding Path=Data.Name, TargetNullValue='N/A' }
Answer: A
certification Microsoft 70-511 examen 70-511 70-511 examen certification 70-511
NO.4 You use Microsoft .NET Framework 4 to create a Windows Forms application.
You add a new class named Customer to the application.
You select the Customer class to create a new object data source.
You add the following components to a Windows Form:
- A BindingSource component named customerBindingSource that is data-bound to the Customer object
data source.
- A set of TextBox controls to display and edit the Customer object properties.
- Each TextBox control is data-bound to a property of the customerBindingSource component.
- An ErrorProvider component named errorProvider that validates the input values for each TextBox
control.
You need to ensure that the input data for each TextBox control is automatically validated by using the
ErrorProvider component.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Implement the validation rules inside the Validating event handler of each TextBox control by throwing
an exception when the value is invalid.
B. Implement the validation rules inside the TextChanged event handler of each TextBox control by
throwing an exception when the value is invalid.
C. Implement the validation rules inside the setter of each property of the Customer class by throwing an
exception when the value is invalid.
D. Add the following code segment to the InitializeComponent method of the Windows Form.
this.errorProvider.DataSource = this.customerBindingSource;
E. Add the following code segment to the InitializeComponent method of the Windows Form.
this.errorProvider.DataSource = this.customerBindingSource.DataSource;
this.errorProvider.DataMember = this.customerBindingSource.DataMember;
Answer: CD
Microsoft certification 70-511 certification 70-511 70-511 examen
NO.5 You use Microsoft .NET Framework 4 to create a Windows Presentation Foundation (WPF) application.
The application contains a composite user control that includes a TextBox control named txtInput.
The user control will be hosted in a window and will have handlers for the text-changed event of txtInput.
You need to ensure that the application meets the following requirements:
AddHandler (TextBox.TextChangedEvent, new RoutedEventHandler (Audit_TextChanged), true);
Which of the following statments are TRUE? (choose all that apply)
A. A text-changed event handler, named Audit_TextChanged, was Created for the txtInput control.
B. Audit_TextChanged will stop running because the event is marked as handled by certain event
handlers.
C. Even through the event is marked handled by certain event handlers, Audit_TextChanged will still run.
D. Audit_TextChanged will continue to run until the event is marked as handled.
Answer: AC
Microsoft examen certification 70-511 70-511 examen 70-511 examen 70-511 certification 70-511
NO.6 You use Microsoft .NET Framework 4 to create a Windows Forms application.
You plan to use a Windows Presentation Foundation (WPF) control of the UserControl1 type hosted in an
ElementHost control named elementHost1.
You write the following code segment. (Line numbers are included for reference only.)
01public class WPFInWinForms {
02public WPFInWinForms
03{
04InitializeComponent();
05
06}
07private void OnBackColorChange(object sender, String propertyName, object value)
08{
09ElementHost host = sender as ElementHost;
10System.Drawing.Color col = (System.Drawing.Color)value;
11SolidColorBrush brush =
new SolidColorBrush(System.Windows.Medi
a.Color.FromRgb(col.R, col.G, col.B));
12UserControl1 uc1 = host.Child as UserControl1;
13uc1.Background = brush;
14}
15}
You need to ensure that the application changes the background color of the hosted control when the
background color of the form changes.
Which code segment should you insert at line 05?
A. elementHost1.PropertyMap.Remove("BackColor");
elementHost1.PropertyMap.Add("BackColor", new PropertyTranslator(OnBackColorChange));
B. elementHost1.PropertyMap.Remove("Background");
elementHost1.PropertyMap.Add("Background", new PropertyTranslator(OnBackColorChange));
C. elementHost1.PropertyMap.Add("BackColor", new PropertyTranslator(OnBackColorChange));
elementHost1.PropertyMap.Apply("BackColor");
D. elementHost1.PropertyMap.Add("Background", new PropertyTranslator(OnBackColorChange));
elementHost1.PropertyMap.Apply("Background");
Answer: A
certification Microsoft certification 70-511 certification 70-511 70-511 examen
NO.7 You use Microsoft .NET Framework 4 to create a Windows Presentation Foundation (WPF) application.
The application contains a composite user control that includes a TextBox control named txtInput.
The user control will be hosted in a window and will have handlers for the text-changed event of txtInput.
You need to ensure that the application meets the following requirements:
- Creates a text-changed event handler named Audit_TextChanged for the txtInput control.
- Executes Audit_TextChanged even when specific handlers mark the event as handled.
Which code segment should you add to the constructor of the user control.?
A. txtInput.TextChanged+=Audit_TextChanged;
B. AddHandler (TextBox.TextChangedEvent, new RoutedEventHandler (Audit_TextChanged), true);
C. EventManager.RegisterClassHandler (typeof (TextBox),TextBox.TextChangedEvent, new
RoutedEventHandler (Audit_TextChanged), true);
D. EventManager.RegisterClassHandler (typeof (TextBox), TextBox.TextChangedEvent, new
RoutedEventHandler (Audit_TextChanged), false);
Answer: B
Microsoft examen 70-511 examen 70-511 examen 70-511 certification 70-511
NO.8 You use Microsoft .NET Framework 4 to create a Windows Presentation Foundation (WPF) application.
You write the following code fragment.
<StackPanel TextBox.PreviewTextInput="StackPanel_PreviewTextInput">
<TextBox Name="TxtBoxA"/>
<TextBox Name="TxtBoxB"/>
<TextBox Name="TxtBoxC"/>
</StackPanel>
You create an event handler named StackPanel_PreviewTextInput. You also have a collection of strings
named Keywords.
You need to ensure that TxtBoxA and TxtBoxB do not contain any of the strings in the Keywords
collections.
Which code segment should you use?
A. private void StackPanel_PreviewTextInput( object sender, TextCompositionEventArgs e)
{ FrameworkElement feSource = sender as FrameworkElement;
if (feSource.Name == "TxtBoxA" || feSource.Name == "TxtBoxB")
{ foreach(string keyword in Keywords)
{
if(e.Text.Contains(keyword)) {
e.Handled = false;
return;
}
}} e.Handled = true;
} }
B. private void StackPanel_PreviewTextInput( object sender, TextCompositionEventArgs e) {
FrameworkElement feSource = e.Source as FrameworkElement;
f (feSource.Name == "TxtBoxA" || feSource.Name == "TxtBoxB")
f (feSource.Name == "TxtBoxA" || feSource.Name == "TxtBoxB") {
foreach(string keyword in Keywords)
{
if(e.Text.Contains(keyword)) {
e.Handled = false;
return;
}
} e.Handled = true;
C. private void StackPanel_PreviewTextInput( object sender, TextCompositionEventArgs e)
{
FrameworkElement feSource = sender as FrameworkElement;
if (feSource.Name == "TxtBoxA" || feSource.Name == "TxtBoxB")
{ foreach(string keyword in Keywords)
{ if(e.Text.Contains(keyword)) {
e.Handled = true;
return; }
} e.Handled = false;
} }
D. private void StackPanel_PreviewTextInput( object sender, TextCompositionEventArgs e)
{ FrameworkElement feSource = e.Source as FrameworkElement;
if (feSource.Name == "TxtBoxA" || feSource.Name == "TxtBoxB")
{
foreach(string keyword in Keywords)
{ if(e.Text.Contains(keyword)) {
e.Handled = true;
return;
} } e.Handled = false;
}
}
Answer: D
certification Microsoft 70-511 examen 70-511 examen 70-511 examen
没有评论:
发表评论