Dans cette société, il y a plein de gens talentueux, surtout les professionnels de l'informatique. Beaucoup de gens IT se battent dans ce domaine pour améliorer l'état de la carrière. Le test 1Y0-A28 est lequel très important dans les tests de Certification Citrix. Pour être qualifié de Citrix, on doit obtenir le passport de test Citrix 1Y0-A28.
Pass4Test est aussi un site d'offrir la ressource des connaissances pour le test Certification IT. Selon les Feedbacks venus de gens qui ont untilié les produits de Pass4Test, Pass4Test est un site fiable comme l'outil de se former. Les Q&As offertes par Pass4Test sont bien précises. Les experts de Pass4Test mettent à jour nos documentations de formation de temps de temps.
Pass4Test est un site web qui vous donne plus de chances à passer le test de Certification Citrix 1Y0-A28. Le résultat de recherche sortis par les experts de Pass4Test peut assurer que ce sera vous ensuite qui réussirez le test Citrix 1Y0-A28. Choisissez Pass4Test, choisissez le succès. L'outil de se former de Pass4Test est bien efficace. Parmi les gens qui ont déjà passé le test, la majorité a préparé le test avec la Q&A de Pass4Test.
Code d'Examen: 1Y0-A28
Nom d'Examen: Citrix (Implementing NetScaler 10 for Networking and Traffic Optimization)
Questions et réponses: 123 Q&As
Code d'Examen: 1Y0-740
Nom d'Examen: Citrix (Citrix WANScaler 4.2: Administration Exam)
Questions et réponses: 95 Q&As
Pass4Test est un site à offrir particulièrement la Q&A Citrix 1Y0-A28, vous pouvez non seulement aprrendre plus de connaissances professionnelles, et encore obtenir le Passport de Certification Citrix 1Y0-A28, et trouver un meilleur travail plus tard. Les documentations offertes par Pass4Test sont tout étudiés par les experts de Pass4Test en profitant leurs connaissances et expériences, ces Q&As sont impresionnées par une bonne qualité. Il ne faut que choisir Pass4Test, vous pouvez non seulement passer le test Citrix 1Y0-A28 et même se renforcer vos connaissances professionnelles IT.
Vous pouvez télécharger tout d'abord le démo gratuit pour prendre un essai. Vous serez confiant davantage sur Pass4Test après l'essai de démo. Vous allez réussir le test Citrix 1Y0-A28 sans aucune doute si vous choisissez le Pass4Test.
La Q&A lancée par Pass4Test est bien poupulaire. Pass4Test peut non seulement vous permettre à appendre les connaissances professionnelles, et aussi les expériences importantes résumées par les spécialistes dans l'Industrie IT. Pass4Test est un bon fournisseur qui peut répondre une grande demande des candidats. Avec l'aide de Pass4Test, vous aurez la confiance pour réussir le test. Vous n'aurez pas aucune raison à refuser le Pass4Test.
1Y0-A28 Démo gratuit à télécharger: http://www.pass4test.fr/1Y0-A28.html
NO.1 The network engineer would like all HTTP and HTTPS requests that travel through the
NetScaler to have an HTTP header added with the source IP address for logging on the web servers.
How should the network engineer accomplish this?
A. Enable Web Logging
B. Enable the client IP option
C. Configure the TCP Parameters
D. Enable the 'Use Source IP mode'
Answer: B
certification Citrix certification 1Y0-A28 1Y0-A28 1Y0-A28 examen 1Y0-A28 examen
6. A network engineer has configured two NetScaler MPX appliances as a high availability (HA)
pair.
What can the engineer configure to prevent failover if only a single interface fails?
A. FIS
B. PBR
C. SNMP
D. VMAC
Answer: A
Citrix examen 1Y0-A28 examen certification 1Y0-A28 certification 1Y0-A28 1Y0-A28 examen
7. Scenario: A NetScaler appliance currently has a manually configured channel containing four
interfaces;
however, the engineer has been told that the NetScaler must now only use a single interface for this
network.
The engineer removes the channel and immediately notices a decrease in network performance.
How could the engineer resolve this issue?
A. Reset the unused interfaces
B. Disable the unused interfaces
C. Enable flow control on all interfaces
D. Disable HA monitoring on the three interfaces that are no longer required
Answer: B
Citrix certification 1Y0-A28 1Y0-A28 examen
8. Scenario: A NetScaler engineer needs to enable access to some web servers running on an
IPv6-only network. The clients connecting
the services are
on an IPv4 network. The
engineer has already enabled IPv6 on the NetScaler. What does the engineer need to do in order to
provide access to the services on the IPv6 network?
A. Create an IPv6 tunnel and a IPv4 virtual server.
B. Configure an IPv6 VLAN and bind the required interface.
C. Create a IPv4 virtual server and bind the service group to it.
D. Create an IPv6 ACL and a IPv4 virtual server and bind the ACL to the virtual server.
Answer: C
certification Citrix 1Y0-A28 examen certification 1Y0-A28 1Y0-A28 certification 1Y0-A28
9. Scenario: An engineer executes the following commands: add vlan 2 bind vlan 2 -ifnum 1 / 2 add
ns ip 10.110.4.200 255.255.255.0 bind vlan 2 -IPAddress 10.110.4.200 255.255.255.0 What type of
IP address has been added to the NetScaler?
A. VIP address
B. NSIP address
C. SNIP address
D. GSLB Site IP address
Answer: C
Citrix examen 1Y0-A28 examen 1Y0-A28 examen certification 1Y0-A28
10. Scenario: A network engineer needs to configure Citrix NetScaler to provide Access Gateway
services to VLAN 2 using interface 1 /1 only, while also using interface 1 / 2 to provide load balancing
services to VLAN 3. How could this result be achieved?
A. Disable static route advertisement.
B. Disable layer 2 mode Create 2 untagged VLANs - VLAN 2 and VLAN 3 Bind VLAN 2 to Interface 1 /1
Bind VLAN 3 to Interface 1 / 2
C. Enable Layer 3 mode Create a Channel Interface using Interface 1 /1 and 1 / 2 Create 2 VMACs Bind
a VMAC to interface 1 /1 and 1 / 2
D. Configure policy-based routing using the Interface option as a filter.
Answer: B
Citrix examen certification 1Y0-A28 1Y0-A28 examen certification 1Y0-A28
11. Scenario: A network engineer needs to re-configure the NetScaler to utilize two new VLANs -
VLAN2 and VLAN3. VLAN2 is an untagged VLAN and VLAN3 will require a .1q compliant tag.
Interface 1 /1 is the only interface that
will be used on the NetScaler. How could the engineer configure
the NetScaler so that it can communicate with both networks?
A. Change the NSVLAN to 3 Add VLAN 2 and bind interface 1 /1 as untagged
B. Enable the Tag all VLANs option on interface 1 /1.
C. Add VLAN2 and bind interface 1 /1 as untagged Add VLAN3 and bind interface 1 /1 as tagged
D. Add a SNIP for each VLAN Enable management access on the SNIP for VLAN3
Answer: C
certification Citrix certification 1Y0-A28 1Y0-A28 examen certification 1Y0-A28
12. Why would an engineer want to specify a TCP Profile for a specific service group?
A. To enable use of features like SSL over TCP for that specific service group.
B. To adjust the TCP settings for traffic to and from that specific service group.
C. To use a specific SNIP for traffic to the back-end servers in that service group.
D. To enable features like use source IP , TCP keep alive and TCP buffering for a specific service group.
Answer: B
Citrix examen certification 1Y0-A28 certification 1Y0-A28 1Y0-A28 examen 1Y0-A28 examen 1Y0-A28 examen
NO.2 A network engineer needs to upgrade both appliances of a High Availability (HA)
pair. In which order should the network engineer upgrade the appliances?
A. Disable high availability and upgrade one node at a time.
B. Upgrade the primary node first without disabling high availability.
C. Upgrade the secondary node first without disabling high availability.
D. Perform the upgrade simultaneously without disabling high availability.
Answer: C
Citrix examen 1Y0-A28 1Y0-A28 examen 1Y0-A28 examen 1Y0-A28 1Y0-A28
NO.3 Scenario: The NetScaler has connections to a large number of VPNs. The network engineer
wants to minimize
the number of ARP requests. Which feature should the network engineer enable to minimize ARP
requests?
A. TCP Buffering
B. Use Source IP
C. Edge Configuration
D. MAC based forwarding
Answer: D
Citrix 1Y0-A28 certification 1Y0-A28
NO.4 What should a network engineer do to prevent unauthorized users from using the root user
account?
A. Reset the nsroot account.
B. Change the nsroot password.
C. Create an authorization policy.
D. Bind a policy to the root user account.
Answer: B
certification Citrix 1Y0-A28 examen certification 1Y0-A28 certification 1Y0-A28 certification 1Y0-A28 certification 1Y0-A28
NO.5 An engineer has two NetScaler devices in two different datacenters and wants to create a high
availability (HA) pair with the two devices, even though they are on two different subnets.
How can the engineer configure the HA Pair between the two NetScaler devices?
A. Configure StaySecondary on the second datacenter appliance.
B. Ensure that INC mode is enabled during the creation of the HA Pair.
C. Enable the HAMonitors on all interfaces after the HA Pair has been created.
D. Change the NSIP of the second appliance to be on the same subnet as the first appliance.
Answer: B
Citrix 1Y0-A28 certification 1Y0-A28 1Y0-A28 examen
没有评论:
发表评论